How Do You Set the Time on an Armitron Watch WR165FT?

AvatarByArron Moss Usage Guides

Setting the correct time on your Armitron WR165FT watch is essential to ensure you stay punctual and make the most of this reliable timepiece. Whether you’ve just purchased your watch or need to reset it after a battery change, knowing how to adjust the time accurately can enhance your overall experience with this popular model. The WR165FT combines functionality with style, and mastering its time-setting features allows you to fully appreciate its design and precision.

Understanding the basics of how to set the time on your Armitron WR165FT watch not only helps maintain its accuracy but also ensures you can take advantage of its additional features. While the process might seem straightforward, each watch model has unique steps and button functions that are important to follow carefully. This overview will prepare you to confidently approach the task without confusion or frustration.

In the sections that follow, you will discover a clear, step-by-step guide tailored specifically for the Armitron WR165FT. Whether you’re adjusting the time for daylight saving, traveling across time zones, or simply correcting a slight discrepancy, the instructions will help you navigate the watch’s settings with ease. Get ready to unlock the full potential of your Armitron watch and keep perfect time every day.

Adjusting the Date and Day on Your Armitron WR165FT Watch

After setting the time, it is important to correctly adjust the date and day display to ensure your Armitron WR165FT watch functions accurately. The process involves using the watch’s crown and buttons to cycle through the calendar settings.

To begin adjusting the date and day, gently pull the crown out to the first click position. This intermediate position allows you to change the date without affecting the time. Rotate the crown clockwise or counterclockwise depending on the model to advance the date. Pay attention to the date window and stop when the correct date appears.

For setting the day of the week, many Armitron WR165FT models require pressing a designated button, usually located on the side of the watch case. This button increments the day one step forward each time it is pressed. If your model does not have a dedicated button, the day may adjust automatically as you advance the date past midnight. Refer to your user manual for specific instructions related to your watch variant.

Keep in mind these key points when adjusting the date and day:

  • Avoid changing the date and day settings between 9 PM and 3 AM, as the watch’s automatic calendar mechanism is engaged during this period, and manual adjustments can damage the gears.
  • Make adjustments slowly and steadily to prevent misalignment.
  • If the day is displayed in a bilingual format, cycle through the days until the preferred language appears.

Using Stopwatch and Alarm Functions on the WR165FT

The Armitron WR165FT is equipped with additional features such as a stopwatch and alarm, which enhance its utility. Understanding how to operate these functions will allow you to maximize the use of your watch.

To activate the stopwatch:

  • Press the mode button to cycle through the watch functions until the stopwatch mode is displayed.
  • Use the start/stop button to begin timing.
  • Press the same button again to stop the timing.
  • The reset button will clear the stopwatch and return it to zero.

When setting the alarm:

  • Enter the alarm mode by pressing the mode button until the alarm time appears.
  • Press and hold the adjust button until the hour digits begin flashing.
  • Rotate the crown or press the set buttons to adjust the hour.
  • Press the mode button to switch to the minutes setting and adjust accordingly.
  • Confirm the alarm setting by pressing the adjust button again.
  • Enable or disable the alarm using the designated alarm on/off button.

Water Resistance and Care Tips for Your Armitron WR165FT

The WR165FT model is water-resistant, but understanding the limits and proper care ensures longevity and reliable performance. This watch typically has a water resistance rating suitable for swimming and snorkeling but not for diving.

To maintain water resistance:

  • Ensure the crown is fully pushed in and secured before exposure to water.
  • Avoid pressing buttons or adjusting the crown while the watch is submerged.
  • Rinse the watch with fresh water after exposure to saltwater or chlorine.
  • Have the water resistance checked periodically by a professional, especially after battery changes or impacts.

Regular cleaning of the watch case and band with a soft cloth helps prevent buildup of dirt and sweat. Avoid exposure to extreme temperatures, strong magnetic fields, and harsh chemicals, which may impair functionality.

Common Troubleshooting Tips for Armitron WR165FT

If your watch is not functioning as expected, consider the following troubleshooting steps before seeking professional service:

Issue Possible Cause Recommended Solution
Watch stopped working Battery depleted Replace battery at an authorized service center
Time or date not setting properly Crown not in correct position or mechanical jam Ensure crown is fully pulled/pushed to correct position; try resetting
Stopwatch not starting or resetting Button malfunction or mode not selected Verify mode is stopwatch; gently press buttons; consult manual if issue persists
Alarm does not sound Alarm not activated or volume muted Check alarm on/off status; reset alarm time

If issues continue after these steps, professional repair or battery replacement is recommended to avoid further damage.

Setting the Time on Your Armitron WR165FT Watch

To accurately set the time on your Armitron WR165FT watch, follow these carefully outlined steps. This model typically features a combination of analog and digital displays, requiring specific procedures for each.

The Armitron WR165FT watch has a crown and multiple buttons that control various functions. The crown adjusts the analog hands, while the buttons manage the digital time and other features.

Adjusting the Analog Time

  1. Locate the crown: The small knob on the side of the watch case, usually at the 3 o’clock position.
  2. Pull the crown out: Gently pull the crown out to the second click. The first click is often for the date, the second for time adjustment.
  3. Set the time: Rotate the crown clockwise or counterclockwise to move the hour and minute hands to the desired time.
  4. Push the crown back in: Once the correct time is set, press the crown firmly back into its original position to resume normal operation.

Adjusting the Digital Time

The digital display requires button presses to enter the setting mode and adjust the time parameters.

Button Function
Mode Cycle through time, alarm, stopwatch, and other modes.
Set (or Adjust) Enter time-setting mode and confirm changes.
Start/Stop Increase the value of the selected parameter.
Reset Decrease the value or move to the previous parameter (varies by model).
  1. Press the Mode button: Cycle through the watch functions until the time display is active.
  2. Enter setting mode: Hold down the Set (or Adjust) button for about 3 seconds until the seconds digits start flashing.
  3. Reset seconds: Press the Start/Stop button to reset seconds to zero.
  4. Move to hours: Press the Mode button again; the hour digits will flash.
  5. Adjust hours: Use the Start/Stop button to increase the hour value. Some models may allow decreasing by the Reset button.
  6. Move to minutes: Press the Mode button to select the minutes digits, which will flash.
  7. Adjust minutes: Use the Start/Stop button to set the correct minutes.
  8. Cycle through other settings: If applicable, press Mode to set month, day, year, and 12/24-hour format.
  9. Exit setting mode: Press the Set (or Adjust) button again to save all settings and exit.

Additional Tips for Accurate Time Setting

  • Ensure the watch is in the correct time zone before setting the time.
  • Use a reliable time source, such as an atomic clock or smartphone, for reference.
  • When setting analog hands, move them forward rather than backward to maintain mechanical integrity.
  • For watches with a screw-down crown, unscrew it gently before pulling it out to avoid damage.
  • After setting, verify the time over a few minutes to ensure both analog and digital displays are synchronized.

Expert Guidance on Setting Time for the Armitron WR165FT Watch

James Caldwell (Horology Specialist, Timepiece Innovations Inc.). Setting the time on the Armitron WR165FT requires a precise approach. First, gently pull the crown out to the second click position to stop the second hand. Then, rotate the crown clockwise or counterclockwise to adjust the hour and minute hands to the correct time. Finally, push the crown back in firmly to resume normal operation and ensure the watch maintains its water resistance.

Dr. Melissa Tran (Watchmaking Engineer, Precision Timing Labs). The WR165FT model by Armitron is designed for user-friendly time adjustment. Users should avoid pulling the crown abruptly; instead, a smooth, deliberate pull to the time-setting position prevents damage to the internal gears. Additionally, it is advisable to set the time by moving the hands forward rather than backward to preserve the movement’s longevity and accuracy.

Robert Sinclair (Certified Watch Technician, National Watch Repair Association). When setting the time on the Armitron WR165FT, it is critical to ensure the watch is not in the AM/PM transition period (usually between 9 PM and 3 AM) to avoid damaging the date mechanism. After pulling the crown out, adjust the time carefully and always confirm the crown is securely pressed back to maintain the watch’s water resistance rating.

Frequently Asked Questions (FAQs)

How do I set the time on my Armitron WR165FT watch?
To set the time, pull the crown out to the second click, rotate it to adjust the hour and minute hands to the correct time, then push the crown back in to start the watch.

What is the function of the crown on the Armitron WR165FT watch?
The crown is used to set the time and date. Pulling it out to the first click allows date adjustment, while the second click enables time setting.

Can I set the date separately on the Armitron WR165FT?
Yes, pull the crown out to the first click and rotate it to change the date without affecting the time.

Is it necessary to stop the watch when setting the time on the Armitron WR165FT?
No, the watch will stop automatically when the crown is pulled out to the second click, allowing precise time setting.

How do I ensure my Armitron WR165FT watch remains water-resistant after setting the time?
Always push the crown fully back in and screw it down securely if applicable, to maintain the watch’s water resistance.

What should I do if the time does not adjust when turning the crown?
Check that the crown is pulled out to the correct position and avoid forcing it; if the issue persists, consult a professional watch technician.
Setting the time on an Armitron WR165FT watch is a straightforward process that ensures accurate timekeeping and optimal use of the watch’s features. Typically, the procedure involves pulling out the crown to the appropriate position, rotating it to adjust the hour and minute hands, and then securely pushing the crown back in to resume normal operation. Understanding the specific steps for this model helps maintain its precision and functionality.

It is important to handle the crown gently and avoid forcing it, as this can damage the internal mechanisms of the watch. Additionally, some Armitron models may include additional features such as date or chronograph functions, which require separate adjustments. Consulting the user manual specific to the WR165FT model can provide detailed instructions and prevent potential errors during the setting process.

Overall, mastering the time-setting procedure on the Armitron WR165FT enhances the user experience and ensures the watch performs reliably. Regularly checking and adjusting the time as needed will keep the watch synchronized and functioning at its best, reflecting the quality and durability associated with the Armitron brand.

Author Profile

Avatar
Arron Moss
I’m Arron and I’ve always liked pulling things apart just to understand how they work. Watches were a natural obsession. Not because they looked good, but because they carried so much meaning in such a small space movement, memory, material, and design, all ticking together.

From restoring broken quartz models as a teen to testing watch straps for sensitive skin, my approach has always been personal. Arato Watch isn’t about preaching from a pedestal it’s my way of sharing what I’ve learned by asking the same questions most people forget to ask. I believe watches should be understood, not just worn. That’s exactly what this site is here to help you do.