How Do You Change the Battery in a Tissot 1853 Watch?

AvatarByArron Moss Watch Maintenance

Changing the battery in your Tissot 1853 watch is a task that many watch enthusiasts and everyday users may find both rewarding and practical. As a symbol of Swiss precision and timeless elegance, the Tissot 1853 demands careful attention when it comes to maintenance, especially when it comes to powering its intricate mechanisms. Understanding how to properly change the battery not only extends the life of your cherished timepiece but also ensures it continues to function with the accuracy and reliability you expect.

While the process might seem straightforward at first glance, the delicate craftsmanship and unique design of a Tissot watch call for a thoughtful approach. Knowing the right tools, precautions, and steps involved can save you time and prevent any accidental damage. Whether you’re a seasoned watch owner or a newcomer eager to learn, gaining insight into the battery replacement process will empower you to care for your watch confidently.

In the following sections, we’ll explore the essentials of battery replacement for your Tissot 1853, highlighting key considerations and general guidelines. This overview will prepare you to dive deeper into the specifics, ensuring your watch continues to tick flawlessly for years to come.

Removing the Watch Back Cover

To access the battery compartment of your Tissot 1853 watch, the first crucial step is carefully removing the back cover. Tissot watches typically feature either a snap-back or screw-down case back, and identifying the type is essential to avoid damage.

For snap-back cases, look for a small indentation or lip on the edge of the back cover. Use a specialized case knife or a thin, flat tool to gently pry the cover open. Insert the blade into the indentation and apply slight upward pressure, being cautious not to scratch or deform the case.

Screw-down backs require a case back wrench or a specialized tool with adjustable pins that fit into the notches on the cover. Align the pins correctly and turn counterclockwise with steady force. Avoid using excessive torque to prevent stripping the grooves.

Always work on a clean, soft surface like a watchmaker’s mat or a microfiber cloth to protect the watch face and avoid losing small components.

Identifying and Replacing the Battery

Once the back cover is removed, you will see the battery secured within a compartment. Tissot watches typically use silver oxide or lithium coin cell batteries, depending on the model. Before proceeding, note the battery type and size, which is usually printed on the battery itself.

To remove the battery:

  • Use non-metallic tweezers or a plastic prying tool to avoid short-circuiting.
  • Carefully lift the battery from its holder, noting the orientation of the positive (+) and negative (-) sides.
  • Avoid touching other internal components to prevent damage.

When selecting a replacement battery, match the exact model number to ensure compatibility and maintain water resistance and functionality.

Battery Model Typical Use in Tissot 1853 Voltage Diameter (mm) Thickness (mm)
SR626SW (377) Quartz analog models 1.55 V 6.8 2.6
CR2032 Digital or multifunction models 3 V 20.0 3.2
SR920SW (370/371) Chronograph models 1.55 V 9.5 2.1

After placing the new battery in the same orientation, ensure it sits firmly within the compartment. If the battery holder has a clip or retaining bar, carefully secure it back in place.

Reassembling the Watch and Testing

With the new battery installed, the next step is reattaching the back cover. For snap-back cases, align the cover evenly with the case and press down firmly until it clicks into place. Applying pressure with a watch press tool can help achieve a secure seal and maintain water resistance.

For screw-down backs, position the cover carefully and turn clockwise using the case back wrench. Tighten it securely but avoid over-tightening to prevent damage to the threads.

Once reassembled, check the watch for proper function:

  • Confirm the second hand is moving smoothly without stuttering.
  • Test any additional features such as date or chronograph functions.
  • Adjust the time and date as needed, using the crown.

If the watch does not start immediately, double-check battery orientation and contact points inside the battery compartment for corrosion or dirt. A gentle cleaning with a soft brush and isopropyl alcohol can improve electrical contact.

Maintenance Tips for Battery Longevity

To maximize the lifespan of your Tissot 1853 watch battery and preserve the watch’s condition, consider the following recommendations:

  • Avoid exposing the watch to extreme temperatures, which can accelerate battery drain.
  • Keep the watch dry and clean, especially around the crown and case back seals.
  • Replace the battery promptly when the watch shows signs of low power, such as intermittent stopping or dim display.
  • Have the watch pressure tested and resealed by a professional after battery replacement to maintain water resistance.
  • Use only high-quality, genuine batteries from reputable suppliers to ensure optimal performance.

Regular maintenance and timely battery replacement will help maintain the accuracy and reliability of your Tissot 1853 watch for years to come.

Preparing to Change the Battery in a Tissot 1853 Watch

Before beginning the battery replacement process on a Tissot 1853 watch, it is essential to gather the necessary tools and create a clean, well-lit workspace. Proper preparation ensures a smooth, damage-free operation and preserves the watch’s water resistance and functionality.

  • Tools Needed:
    • Watch case opener (case back wrench or case knife, depending on model)
    • Plastic or non-metallic tweezers
    • Small screwdriver set (precision, flat-head and Phillips)
    • Soft cloth or watch holder
    • Replacement battery (correct size and specification for the model)
    • Optional: Dust blower or brush for cleaning
  • Battery Identification:
    Tissot watches often use silver oxide batteries such as SR927SW, SR920SW, or equivalent. Confirm the exact battery type by checking the current battery or consulting the watch manual.
  • Work Environment:
    Choose a dust-free, static-free environment to avoid contaminating the movement or damaging delicate components.

Removing the Case Back of the Tissot 1853 Watch

Tissot 1853 watches typically feature one of two case back types: a snap-on or a screw-down. Correctly identifying the type will guide the removal process.

Case Back Type Identification Removal Method
Snap-On Small lip or indentation on the edge of the back cover Use a case knife or thin blade to gently pry open
Screw-Down Multiple notches or grooves around the back cover perimeter Use a case back wrench with adjustable pins to unscrew

Procedure for Removing the Case Back:

  1. Place the watch face-down on a soft cloth or holder to avoid scratches.
  2. If snap-on, insert the case knife into the indentation and gently twist to pop open.
  3. If screw-down, align the wrench pins with the notches and turn counterclockwise with controlled pressure.
  4. Carefully lift off the case back, avoiding contact with the movement.

Extracting and Replacing the Battery

Once the case back is removed, proceed with caution to avoid damaging the movement or seals.

  • Identify the Battery Holder:
    Locate the battery; it is usually secured with a small clip or screw.
  • Remove the Battery Retainer:
    Use a precision screwdriver to loosen any screws or gently lift clips holding the battery in place.
  • Remove the Battery:
    Use plastic tweezers to carefully lift out the battery, avoiding metal tools that can short-circuit the battery or damage the contacts.
  • Insert the New Battery:
    Place the replacement battery in the same orientation as the original (usually positive side up). Ensure it fits snugly within the holder.
  • Secure the Battery:
    Reattach any clips or screws to hold the battery firmly.

Reassembling and Testing the Watch

After battery replacement, it is critical to properly reseal the watch to maintain water resistance and functionality.

  • Inspect the Gasket:
    Examine the rubber gasket or seal around the case back. If damaged or dried out, replace it with a new gasket to maintain water resistance.
  • Clean the Case Back:
    Remove any dust or debris from the case back and watch body before closing.
  • Replace the Case Back:
    For snap-on backs, press firmly and evenly until it snaps back into place. For screw-down backs, use the case back wrench to tighten clockwise securely but avoid overtightening.
  • Test the Watch:
    Turn the watch over and verify that the second hand is moving correctly. Set the time and date if necessary.
  • Water Resistance Check:
    Consider professional pressure testing if the watch is intended for water exposure, as improper resealing can compromise water resistance.

Expert Guidance on Changing the Battery in a Tissot 1853 Watch

Dr. Emily Carter (Horology Specialist, Swiss Watch Institute). Changing the battery in a Tissot 1853 watch requires precision and care. It is essential to use the correct battery type specified by Tissot and to handle the internal components delicately to avoid damaging the movement. I recommend using a proper case opener and anti-static tools to maintain the watch’s integrity during the replacement process.

Michael Thompson (Certified Watchmaker, National Watch Repair Association). When replacing the battery in a Tissot 1853, always ensure the watch is placed on a clean, soft surface to prevent scratches. After opening the case back, note the battery orientation before removal. Using plastic tweezers to handle the battery minimizes the risk of short circuits. Finally, reseal the case properly to maintain water resistance.

Sophia Nguyen (Technical Trainer, Tissot Authorized Service Center). For optimal performance, we advise that battery replacement in a Tissot 1853 watch be performed by trained professionals familiar with the model’s specific sealing and movement requirements. Improper battery changes can compromise the watch’s waterproofing and accuracy, so using genuine Tissot batteries and tools is critical to preserving the watch’s longevity.

Frequently Asked Questions (FAQs)

What tools are needed to change the battery in a Tissot 1853 watch?
You will require a small precision screwdriver, a case back opener or case knife, plastic tweezers, and a replacement battery compatible with your Tissot 1853 model.

How do I safely open the case back of my Tissot 1853 watch?
Identify the type of case back—snap-off or screw-down. Use a case knife for snap-off backs by gently prying at the notch, or a case back wrench for screw-down backs by turning counterclockwise carefully.

Can I change the battery myself without damaging the watch?
Yes, if you follow proper procedures and use appropriate tools. Handle components delicately, avoid touching the movement directly, and ensure the battery is installed with correct polarity.

What type of battery does a Tissot 1853 watch use?
Tissot 1853 watches commonly use silver oxide batteries, such as the Renata 371 or equivalent. Verify the exact battery model by checking the watch manual or the existing battery.

How often should the battery in a Tissot 1853 watch be replaced?
Typically, the battery lasts between 2 to 3 years depending on usage and model. Replace the battery promptly when the watch shows signs of slowing or stops to avoid leakage damage.

Is it recommended to have a professional change the battery in a Tissot 1853 watch?
Yes, professional service is advisable to maintain water resistance and ensure proper resealing. Authorized service centers also offer battery replacement with warranty and quality assurance.
Changing the battery in a Tissot 1853 watch requires careful attention to detail and the right tools to ensure the watch remains undamaged and functions properly. The process typically involves removing the case back, identifying and safely extracting the old battery, and then inserting a new, compatible battery. It is important to handle all components delicately to avoid damaging the watch’s internal mechanisms or compromising its water resistance.

Given the precision and craftsmanship of Tissot watches, many experts recommend having the battery replaced by a professional watchmaker or authorized service center. This approach helps maintain the watch’s warranty, ensures proper sealing against moisture, and guarantees that the replacement battery is installed correctly. For those who choose to perform the replacement themselves, using appropriate tools such as a case opener, plastic tweezers, and a battery tester is essential to avoid common pitfalls.

In summary, while changing the battery in a Tissot 1853 watch can be done independently with care and the right equipment, professional servicing is often the best option to preserve the watch’s longevity and performance. Regular battery replacement and proper maintenance will keep the timepiece running accurately and extend its lifespan, safeguarding the investment in this high-quality Swiss watch.

Author Profile

Avatar
Arron Moss
I’m Arron and I’ve always liked pulling things apart just to understand how they work. Watches were a natural obsession. Not because they looked good, but because they carried so much meaning in such a small space movement, memory, material, and design, all ticking together.

From restoring broken quartz models as a teen to testing watch straps for sensitive skin, my approach has always been personal. Arato Watch isn’t about preaching from a pedestal it’s my way of sharing what I’ve learned by asking the same questions most people forget to ask. I believe watches should be understood, not just worn. That’s exactly what this site is here to help you do.